Show Interface Transceiver - Cisco Nexus 5000 Series Command Reference Manual
Interface
Hide thumbs
Also See for Nexus 5000 Series:
- Cli configuration manual (660 pages) ,
- Configuration manual (334 pages) ,
- Operation manual (45 pages)
Table of Contents
Advertisement
Show Commands
show interface transceiver
To display the information about the transceivers connected to a specific interface, use the show interface
transceiver command.
show interface ethernet slot / port transceiver [details]
Syntax Description
ethernet slot /port
details
Command Default
None
Command Modes
EXEC mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
You can use the show interface transceiver command only for physical interfaces.
Examples
This example shows how to display the transceivers connected to a specified Ethernet interface:
switch# show interface ethernet 1/1 transceiver
Ethernet1/1
switch#
transceiver is present
type is SFP-H10GB-CU1M
name is CISCO-MOLEX
part number is 74752-9044
revision is 07
serial number is MOC14081360
nominal bitrate is 10300 MBit/sec
Link length supported for copper is 1 m
cisco id is --
cisco extended id number is 4
Displays information about an Ethernet interface slot
number and port number. The slot number is from 1
to 255, and the port number is from 1 to 128.
(Optional) Displays detailed information about the
transceivers on an interface.
Modification
This command was introduced.
Cisco Nexus 5000 Series Interfaces Command Reference
show interface transceiver
139
- Quick Links:
- Interface Ethernet
Hide quick links:
Advertisement
Chapters
Table of Contents
