Link Debounce - Cisco Nexus 5000 Series Command Reference Manual
Interface
Hide thumbs
Also See for Nexus 5000 Series:
- Cli configuration manual (660 pages) ,
- Configuration manual (334 pages) ,
- Operation manual (45 pages)
Table of Contents
Advertisement
L Commands
link debounce
To enable the debounce timer on an interface, use the link debounce command. To disable the timer, use the
no form of this command.
link debounce [time milliseconds]
no link debounce
Syntax Description
time milliseconds
Command Default
None
Command Modes
Interface configuration mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
The port debounce time is the amount of time that an interface waits to notify the supervisor of a link going
down. During this time, the interface waits to see if the link comes back up. The wait period is a time when
traffic is stopped.
When you enable the debounce timer, link up and link down detections are delayed, resulting in a loss of
Caution
traffic during the debounce period. This situation might affect the convergence of some protocols.
Examples
This example shows how to enable the debounce timer and set the debounce time to 1000 milliseconds for
an Ethernet interface:
switch# configure terminal
switch(config)# interface ethernet 1/1
switch(config-if)# link debounce time 1000
This example shows how to disable the debounce timer for an Ethernet interface:
switch(config-if)# no link debounce
(Optional) Specifies the extended debounce timer.
The range is from 0 to 5000 milliseconds. A value of
0 milliseconds disables the debounce time.
Modification
This command was introduced.
Cisco Nexus 5000 Series Interfaces Command Reference
link debounce
67
- Quick Links:
- Interface Ethernet
Hide quick links:
Advertisement
Chapters
Table of Contents
