No Switchport - Cisco Nexus 5000 Series Command Reference Manual
Interface
Hide thumbs
Also See for Nexus 5000 Series:
- Cli configuration manual (660 pages) ,
- Configuration manual (334 pages) ,
- Operation manual (45 pages)
Table of Contents
Advertisement
no switchport
no switchport
To configure the interface as a Layer 3 Ethernet interface, use the no switchport command.
no switchport
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Interface configuration mode
Command History
Release
5.0(3)N1(1)
Usage Guidelines
You can configure any Ethernet port as a routed interface. When you configure an interface as a Layer 3
interface, any configuration specific to Layer 2 on this interface is deleted.
If you want to configure a Layer 3 interface for Layer 2, enter the switchport command. Then, if you change
a Layer 2 interface to a routed interface, enter the no switchport command.
Examples
This example shows how to enable an interface as a Layer 3 routed interface:
switch(config)# interface ethernet 1/5
switch(config-if)# no switchport
switch(config-if)#
This example shows how to configure a Layer 3 interface as a Layer 2 interface:
switch(config)# interface ethernet 1/5
switch(config-if)# switchport
switch(config-if)#
Related Commands
Command
copy running-config startup-config
interface ethernet (Layer 3)
Cisco Nexus 5000 Series Interfaces Command Reference
74
Modification
This command was introduced.
Description
Saves the running configuration to the startup
configuration file.
Configures an Ethernet routed interface or
subinterface.
N Commands
- Quick Links:
- Interface Ethernet
Hide quick links:
Advertisement
Chapters
Table of Contents
