Replacing The Heat Sink; Removing The Heat Sink - Lenovo THINKCENTRE 9120 Replacement Manual
Lenovo computer hardware installation and replacement guide
Hide thumbs
Also See for THINKCENTRE 9120:
- Hardware maintenance manual (348 pages) ,
- User manual (76 pages) ,
- Benutzerhandbuch (74 pages)
Table of Contents
Advertisement
Replacing the heat sink
This section provides instructions on how to replace the heat sink.
1. Remove the computer cover. See "Removing the cover" on page 11.
2. Lay the computer on its side.
3. Locate the heat sink. See "Identifying parts on the system board" on page 9.
4. Disconnect the heat sink and the fan assembly cable from the system board.
5. Pivot the handle 1 to release the heat sink clamp and then disengage the
Figure 20. Removing the heat sink
6. Lift the failing heat sink and fan assembly off the system board.
Attention
Do not open your computer or attempt any repair before reading the "Important safety
information" in the Safety and Warranty Guide that was included with your computer. To
obtain a copy of the Safety and Warranty Guide, go to the Support Web site at
http://www.lenovo.com/support.
clamp from the plastic retention bracket.
Chapter 3. Installing options and replacing hardware
25
Advertisement
Table of Contents
