Grease Filters - Miele DA 1160 Operating And Installation Instructions
Hide thumbs
Also See for DA 1160:
- Information (4 pages) ,
- Operating and installation instructions (32 pages) ,
- Operating and installation instructions (40 pages)
Table of Contents
Advertisement
Important for appliances with
lacquered housing
It is very difficult to clean this type of
surface without causing minor marks to
the surface material.
This can become particularly
noticeable if there is halogen lighting in
the kitchen.
Important information for cleaning
the controls
The controls may suffer
discolouration or damage if soiling is
left on them for too long. Remove
soiling straight away.
Observe the general information on
cleaning earlier in this section.
Do not use stainless steel cleaning
agents on the controls.
Cleaning and care
Grease filters
The re-usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
rangehood.
To avoid a build-up of fat, they should
be cleaned every 3–4 weeks on
average, but sooner if necessary.
,
An oversaturated filter is a fire
hazard.
^ Open the latch for the grease filter
and lower the filter to remove it.
To avoid damaging the filter or the
cooktop below, make sure you hold
the filter securely at all times when
handling it.
13
- Quick Links:
- Charcoal Filter
- Installation
Hide quick links:
Advertisement
Table of Contents
