Download Print this page

Miele DA 1160 Operating And Installation Instructions page 24

Hide thumbs Also See for DA 1160:

Table of Contents

Installation

^ Hang the rangehood on the mounting

plates.

^ Tighten the screws at the back of the

rangehood on the left and right. This

will adjust the pitch of the rangehood

and secure it against being lifted off

the mounting plates.

^ Refit the halogen lamps.

^ Refit the grease filters.

^ If using air extraction mode, install

the exhaust ducting and connections.

With air extraction mode:

^ When using exhaust ducting

C 150 mm, separate the exhaust

socket at the tapered section with a

sharp knife.

For exhaust ducting C 125 mm,

install the exhaust socket without

modifications. Please note,

installation of 150 mm is

recommended.

^ If required, install the non-return flap.

Check that the flap opens easily and

closes by itself.

Table of Contents

Show Quick Links

Table of Contents