Table of Contents
Advertisement
Getting Started
Connecting peripheral devices
Use the I/O connectors on the back of the server to connect peripheral devices such as
the keyboard, mouse, display and so on. Be sure the devices are properly connected
before turning on the server.
To connect peripheral devices to the server:
1
Make sure that the server and all connected peripheral devices are turned off and
that their power cables are not plugged into an AC outlet.
2
Using the proper interface cable, connect each peripheral device to an appropriate
connector on the server. If the plug on the interface cable has thumbscrews, tighten
the thumbscrews sufficiently to secure the cable.
Connecting peripheral devices
3
Tighten any connector screws.
4
Plug the power cables from the server and peripheral devices into AC outlets. Make
sure all peripheral devices are properly connected before turning on the server.
Connecting peripheral devices
39
Advertisement
Table of Contents
