Table of Contents
Advertisement
Connecting Hardware Devices
Installing SCSI devices
Use only SCSI devices recommended by Toshiba. Other devices may be the wrong size
and shape to fit in the device bay, or they may cause unstable operation or other
problems. Toshiba assumes no responsibility for devices not specifically recommended.
1
If the server is in operation, shut it down. Then remove the access panel. For
detailed instructions, read Steps 1 through 4 in
Installing a SCSI device while the power is on may damage the server and the
SCSI device.
SCSI devices can be seriously damaged by static electricity. Wear a wrist or
heel ground cable to discharge static electricity carried on your body. If such
equipment is not available, touch a grounded metal object to discharge static
electricity before working with sensitive electronic components.
2
Remove the device bay spacer. For instructions, see
on page 87.
3
Remove the rails attached to the device bay spacer.
Removing the rails from the device bay spacer
Maintenance overview
Removing device bay spacers
88
SCSI devices
on page 50.
Advertisement
Table of Contents
