Table of Contents
Advertisement
Figure 188. The fixed power paddle card installation
Step 13. Align the redundant power paddle card to the server chassis . Then, fasten the 6 screws to secure
the redundant power paddle card.
Figure 189. The redundant power paddle card installation
Step 14. Reconnect the cables to the power paddle card (see "Internal cable routing and connectors" on
page 33).
Step 15. Pull up the plunger of the power paddle card cover and gently put it down. Then, push it backward
to the rear of the chassis until it clicks into place.
Power paddle card (fixed)
Power paddle card
(redundant)
Chapter 6
.
Removing and replacing components
269
Advertisement
Table of Contents
Troubleshooting
