Clock Timezone - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Basic System Commands

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

clock timezone

To configure the time zone offset from Coordinated Universal Time (UTC), use the clock timezone

command. To revert to the default, use the no form of this command.

Syntax Description

offset-hours

offset-minutes

Command Default

Command Modes

Interface configuration mode

Command History

4.0(0)N1(1a)

Usage Guidelines

Use the command to offset the device clock from UTC.

This example shows how to configure the time zone offset from UTC:

switch(config)# clock timezone PST -8 0

This example shows how to revert the time zone offset to the default:

switch# no clock timezone

Related Commands

clock timezone zone-name offset-hours offset-minutes

no clock timezone

Zone name. The name is a 3-character string for the time zone acronym (for

example, PST or EST).

Number of hours offset from UTC. The range is from –23 to 23.

Number of minutes offset from UTC. The range is from 0 to 59.

Modification

This command was introduced.

Displays the clock time.

Cisco Nexus 5000 Series Command Reference

clock timezone