Feature Private-Vlan - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Basic System Commands

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

feature private-vlan

To enable private VLANs, use the feature private-vlan command. To return to the default settings, use

the no form of this command.

Syntax Description

Command Default

Private VLANs are disabled.

Command Modes

Configuration mode

Command History

4.0(0)N1(1a)

Usage Guidelines

The private VLAN commands are not available until you enable the private VLAN feature.

You cannot disable the private VLANs if there are operational ports on the switch that are in private

A PVLAN isolated port on a Cisco Nexus 5000 Series switch running the current release of Cisco

NX-OS does not support IEEE 802.1q encapsulation and cannot be used as a trunk port.

This example shows how to enable private VLAN functionality on the switch:

switch(config)# feature private-vlan

Related Commands

private-vlan

show vlan private-vlan Displays information on private VLANs. If the feature is not enabled, this

feature private-vlan

no feature private-vlan

Modification

This command was introduced.

Configures a VLAN as either a community, isolated, or primary private

command is not available.

Cisco Nexus 5000 Series Command Reference

feature private-vlan