Replacing The Front Audio/Usb Assembly - Lenovo ThinkCentre 9120 Hardware Maintenance Manual
Hide thumbs
Also See for ThinkCentre 9120:
- Replacement manual (62 pages) ,
- User manual (76 pages) ,
- Benutzerhandbuch (74 pages)
Table of Contents
Advertisement
7. Route the fan cable to the system board and connect the cable to the system
8. Replace the front bezel.
9. Go to "Completing the FRU replacement" on page 135.
Replacing the front audio/USB assembly
This procedure describes how to remove and replace the front audio/USB
assembly.
10. Go to "Completing the FRU replacement" on page 110.
108
Hardware Maintenance Manual
board. See "Locating parts on the system board" on page 89.
1. Remove the computer cover. See "Removing the cover" on page 87.
2. Remove the front bezel. See "Removing and replacing the front bezel" on
page 89
3. Disconnect the front audio/USB assembly cable from the system board. See
"Locating parts on the system board" on page 89.
4. Note the front audio/USB assembly cable routing and remove the screw that
secures the assembly to the chassis.
5. Remove the front audio/USB assembly.
6. Route the cable for the new front audio/USB assembly through the hole in the
chassis and to the system board.
7. Install the front audio/USB assembly into the chassis and secure it with the
screw.
8. Connect the front audio/USB assembly cable to the system board.
9. Reinstall the front bezel.
Advertisement
Chapters
Table of Contents
