Locating Parts On The System Board; Removing And Replacing The Front Bezel - Lenovo ThinkCentre 9120 Hardware Maintenance Manual
Hide thumbs
Also See for ThinkCentre 9120:
- Replacement manual (62 pages) ,
- User manual (76 pages) ,
- Benutzerhandbuch (74 pages)
Table of Contents
Advertisement
Locating parts on the system board
Removing and replacing the front bezel
This procedure describes how to remove and replace the front bezel.
1. Remove the computer cover. See "Removing the cover" on page 87.
2. Remove the front bezel by releasing the three plastic tabs inside the chassis and
1
Microprocessor fan connector
2
Microprocessor and heat sink
3
Memory connector 1
4
Memory connector 2
5
Memory connector 3
6
Memory connector 4
7
Cover presence switch connector
8
Diskette drive connector
9
IDE connector
10
Power connector
11
Front system fan connector
12
SATA IDE connectors (4)
13
Front panel connector
pivoting the bezel outward. Carefully set the bezel to the side without
disconnecting the power switch/LED assembly cable.
14
Front USB connectors (2)
15
Battery
16
Clear CMOS/Recovery jumper
17
Serial (COM) connector
18
PCI adapter connectors
19
Mono (speaker) connector
20
Front audio connector
21
CD-IN connector
22
PCI Express x16 graphics adapter
connector
23
PCI Express x1 adapter connector
24
System fan connector
25
12v power connector
Chapter 8. Replacing FRUs - Tower Computers
89
Advertisement
Chapters
Table of Contents
