Replacing A Pci Adapter - Lenovo ThinkCentre 9120 Hardware Maintenance Manual
Hide thumbs
Also See for ThinkCentre 9120:
- Replacement manual (62 pages) ,
- User manual (76 pages) ,
- Benutzerhandbuch (74 pages)
Table of Contents
Advertisement
10. Align the drive bay assembly with the two slots and rails on the sides of the
11. Reinstall the front bezel.
12. Go to "Completing the FRU replacement" on page 135.
Replacing a PCI adapter
This procedure describes how to remove and replace a PCI adapter.
1. Remove cover. See "Removing the cover" on page 113.
2. Open the adapter latch and remove the failing adapter.
3. Remove the new adapter from its static-protective package.
4. Install the new adapter into the appropriate connector on the system and close
134
Hardware Maintenance Manual
7. Install the new system fan assembly and install the two screws that secure the
fan assembly.
8. Connect the system fan cable to the system fan connector on the system
board.
9. Reinstall the hard disk drive. See "Replacing the hard disk drive" on page
128.
chassis and slide the drive bay assembly towards the rear of the chassis until
it snaps into position.
the adapter latch.
Advertisement
Chapters
Table of Contents
