Redundancy Auto-Failover-Limit - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

show processes restartable

redundancy auto-failover-limit

Specify an auto-failover limit for RPMs. When a non-recoverable fatal error is detected, an automatic

RPM failover occurs. This command does not affect user-initiated (manual) failovers.

redundancy auto-failover-limit [count number [period minutes] |

period minutes]]

To disable the auto-failover limit control, use the no redundancy auto-

failover-limit command.

count number

period minutes

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.1.1.0

Version 7.5.1.0

Version 7.6.1.0

High Availability (HA)

Enter the number of times the RPMs can automatically

failover within the period defined in the period parameter.

The range is from 2 to 10. The default is 3.

Enter a duration in which to allow a number of automatic

failovers (limited to the number defined in the count

parameter). The range is from 5 to 9000 minutes. The

default is 60 minutes.

Period: 60 minutes

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the E-Series ExaScale.

Introduced on the C-Series.

Introduced on the E-Series

Show Quick Links

Table of Contents