No Wlan Any Ssid (Client) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

no wlan any ssid (client)

With this command, you disable the "Any ssid" function. The client attempts to connect to the

access point from the SSID list that provides the best transmission quality and on which the

"Broadcast SSID" option is disabled.

This command is only available in the client mode.

● An active SSID is available.

You are in the Interface configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-if-wlan-0-X)#

Call the command without parameter assignment:

no wlan any ssid

The function is disabled.

Further notes

You display the setting with the show wlan client <wlan 0/X> command.

You enable the function with the wlan any ssid command (default setting).

Table of Contents