Wlan Ipcf-Mc Roaming-Filter (Client) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

The parameter has the following meaning:

num-of-cycles

The time is set.

Further notes

You display the setting with the show wlan ipcf-mc command.

wlan ipcf-mc roaming-filter (client)

The command is only available if the SCALANCE W700 device supports iPFC-MC or the

function can be enabled.

● iPCF-MC is enabled with the aid of the following KEY-PLUGs:

– W780 iFeatures (MLFB 6GK5 907-8PA00)

– W740 iFeatures (MLFB 6GK5 907-4PA00)

With this command you specify the number of RSSI single measurements from which the

median is determined.

You are in the WLAN configuration mode.

The command prompt is as follows:

cli(config-wlan)#

Call up the command with the following parameters:

wlan ipcf-mc roaming-filter <5-15>

The parameter has the following meaning:

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Number of measure‐

Functions specific to SCALANCE

Range of values / note

Range of values / note

Show Quick Links

Table of Contents