Show Ipv6 Traffic - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

cli> or cli#

Call the command without parameters:

show ipv6 static route

The static routes are displayed.

show ipv6 traffic

This command shows the statistics for UDP and ICMPv6 for the corresponding interface.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

cli> or cli#

Call up the command with the following parameters:

show ipv6 traffic [

The parameters have the following meaning:

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

interface { vlan <vlan-id> | <interface-type> <interface-id> }

Keyword for the interface via which the statistics

are created.

Keyword for a VLAN

Keyword for a VLAN connection

Type or speed of the interface

Module no. and port no. of the interface

Display of the High counters parameter

Network protocols

8.2 IPv6 protocol

Range of values / note

Enter a valid interface.

Show Quick Links

Table of Contents