Show Interfaces - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

For information on identifiers of addresses and interfaces, refer to the section "Interface

identifiers and addresses (Page 29)".

If you do not select any parameters from the parameter list, the status and configuration of all

available interfaces will be displayed.

The status and the configuration of the selected interfaces are displayed.

show interfaces ... counters

This command shows the counters of one, several or all interfaces.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

cli> or cli#

Call up the command with the following parameters:

show interfaces

id(1-4094)>}]counters

The parameters have the following meaning:

interface-type

interface-id

For information on identifiers of addresses and interfaces, refer to the section "Interface

identifiers and addresses (Page 29)".

If you do not select any parameter from the parameter list, the entries are displayed for all

available counters.

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Keyword for a VLAN connection

Number of the addressed VLAN

[{<interface-type><interface-id>]|{vlan<vlan-

Type or speed of the interface

Module no. and port no. of the interface

Keyword for a VLAN connection

Number of the addressed VLAN

Configuration

Range of values / note

Range of values / note

Enter a valid interface.

Show Quick Links

Table of Contents