Table of Contents
Advertisement
The parameters have the following meaning:
Parameter
prefix addr
mtu
For information on names of addresses and interfaces, refer to the section "Interface identifiers
and addresses (Page 29)".
Result
The maximum packet size is configured.
Further notes
You display the configuration with the show ipv6 pmtu command.
You disable the maximum packet size with the no ipv6 path mtu command.
You enable the PMTU Discovery function with the command ipv6 path mtu discovery.
8.2.3.4
no ipv6 path mtu
Description
With this command you disable the use of the maximum packet size. In other words, the setting
is no longer used with the PMTU Discovery function.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no ipv6 path mtu <prefix addr>
The parameter has the following meaning:
Parameter
prefix addr
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
IPv6 address of the recipient
Size in bytes
Description
IPv6 address of the recipient
Network protocols
8.2 IPv6 protocol
Range of values / note
Enter a valid IPv6 address
0 ... 65535
Default: 1500
Range of values / note
Enter a valid IPv6 address
365
Hide quick links:
Advertisement
Table of Contents
