Wlan Security Ap-Radius-Authenticator Max-Retransmit - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Security and authentication

The RADIUS server is enabled.

Further notes

You display the setting with the show wlan security ap-radius-authenticator

wlan security ap-radius-authenticator max-retransmit

With this command, you configure maximum number of attempts to establish a connection.

This command is available only in access point mode.

You are in the WLAN Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-wlan)#

Call up the command with the following parameters:

wlan security ap-radius-authenticator max-retransmit <index (1-2)>

The parameters have the following meaning:

The maximum number of attempts to establish a connection is configured.

Index of the RADIUS server

Number of connection attempts

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Range of values / note

Configuration Manual, 09/2017, C79000-G8976-C324-08

Show Quick Links

Table of Contents