Table of Contents
Advertisement
Further notes
You display the setting with the show wlan security ap-radius-authenticator
command.
See also
show wlan security ap-radius-authenticator (Access Point) (Page 496)
11.3.2.5
wlan security ap-radius-authenticator port-number
Description
With this command, you configure the input port of the RADIUS server.
Note
This command is available only in access point mode.
Requirement
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#
Syntax
Call up the command with the following parameters:
wlan security ap-radius-authenticator port-number <index (1-2)>
<1-65535>
The parameters have the following meaning:
Parameters
index
1-65535
Result
The input port is configured.
Further notes
You display the setting with the show wlan security ap-radius-authenticator
command.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
Index of the RADIUS server
Number of port
Security and authentication
11.3 WLAN
Range of values / note
1...2
1...6553
503
Hide quick links:
Advertisement
Table of Contents
