Switchport Access Vlan - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

The parameters have the following meaning:

At system start or when using the restart command with the option memoryor factory,

the following defaults apply:

● The function is configured for all.

The setting is enabled.

Further notes

You can display the status of this function and other information with the show vlan port

config command.

switchport access vlan

With this command, you assign an VLAN to an interface and configure the port VLAN identifier

(PVID) for it.

You are in the Interface configuration mode.

The command prompt is as follows:

cli(config-if-$$$)#

Call up the command with the following parameters:

switchport access vlan <vlan-id(1-4094)>

The parameter has the following meaning:

The Interface is added to the VLAN as an untagged port and the corresponding VLAN ID is

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

All frames (with and without VLAN variables) are accepted

Only frames with VLAN variables are accepted

Number of the addressed VLAN

Network structures

Range of values / note

Show Quick Links

Table of Contents