Sftp Load; Sftp Save - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Configuration

4.2 Load and Save

Further notes

With the "show loadsave files" command, you can display the file types.

sftp load

With this command, you load a file from an SFTP server into the file system of the device. You

can also display a list of available files.

● The name of the file is specified

● You are in the LOADSAVE configuration mode.

The command prompt is:

cli(config-loadsave)#

Call up the command with the following parameters:

tftp load{showfiles|filetype<filetype>}

The parameters have the following meaning:

The file types are displayed or the file is downloaded to the device.

Further notes

You configure the name of the file with the tftp filename command.

With the "show loadsave files" command, you can display the file types.

With this command, you copy a file from the file system of the device to an SFTP server. The

SFTP protocol is used for the transfer. You can also display a list of available files.

Shows the available files

Keyword for a file type to be loaded

Name of the file type

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Range of values / note

max. 100 characters

Configuration Manual, 09/2017, C79000-G8976-C324-08

Show Quick Links

Table of Contents