Http Server; The "Show" Commands; Show Ip Http Server Status - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Network protocols

8.8 HTTP server

You are in the EVENTS configuration mode.

The command prompt is as follows:

cli(config-events)#

Call the command without parameters:

no smtp-port

The SMTP port is reset to the default value.

Further notes

You configure the setting with the smtp-port command.

You display the setting with the show smtp-port command.

This section describes commands of the Hypertext Transfer Protocol (HTTP).

This section describes commands with which you display various settings.

This command shows the status of the HTTP server.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

cli> or cli#

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Show Quick Links

Table of Contents