Vap Wds Only (Access Point); No Vap Wds Only (Access Point) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Network structures

vap wds only (access point)

With this command, you specify that the access point only supports communication via WDS.

This command is available only in access point mode.

You are in the Interface Configuration mode of the VAP interface.

The command prompt is as follows:

cli (config-if-vapX-0-Y)#

Call the command without parameter assignment:

vap wds only

You have specified who the VAP interface connects to.

Further notes

You display the setting with the show wlan vap <vap X 0/Y>command.

You disable the function with the no vap wds only command (default setting).

With this command, you specify that the access point supports not only communication via

WDS. This setting is activated as default.

This command is available only in access point mode.

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Show Quick Links

Table of Contents