Ipcf; The "Show" Commands; Show Wlan Ipcf - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

iPCF

This section describes the commands relevant for working with the iPCF function (industrial

Point Coordination Function).

This commands are only available with the following KEY-PLUGs:

● W780 iFeatures (MLFB 6GK5 907-8PA00)

● W740 iFeatures (MLFB 6GK5 907-4PA00)

This section describes commands with which you display various settings.

This commands are only available with the following KEY-PLUGs:

● W780 iFeatures (MLFB 6GK5 907-8PA00)

● W740 iFeatures (MLFB 6GK5 907-4PA00)

This command is only available with the following KEY-PLUG:

● W740 iFeatures (MLFB 6GK5 907-4PA00)

This command shows the settings of iPCF.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

cli> or cli#

Call up the command with the following parameters:

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Functions specific to SCALANCE

Show Quick Links

Table of Contents