Ipv6 Path Mtu - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Network protocols

8.2 IPv6 protocol

The parameter has the following meaning:

IPv6 address of the neighbor node

Keyword for a VLAN connection

Number of the addressed VLAN

Type or speed of the interface

Module no. and port no. of the interface

interface-id

Link layer address (MAC address) of the neighbor node

For information on names of addresses and interfaces, refer to the section "Interface identifiers

and addresses (Page 29)".

The entry is deleted.

Further notes

You configure an entry with the no ipv6 neighbor command.

You display the IPv6 neighbor table with the show ipv6 neighbors command.

ipv6 path mtu

With this command, you configure maximum packet size (MTU). The setting is only effective

if PMTU Discovery is enabled.

You are in the Global configuration mode.

The command prompt is as follows:

cli(config)#

Call up the command with the following parameters:

ipv6 path mtu <prefix addr> <mtu>

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Range of values / note

Enter a valid IPv6 address.

Enter a valid interface.

xx:xx:xx:xx:xx:xx

Show Quick Links

Table of Contents