Wlan Background Scan Interval (Client); Wlan Background Scan Mode (Client) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Network structures

wlan background scan interval (client)

With this command, you specify the Interval at which the client scans for further access points.

This command is only available in the client mode.

You are in the Interface Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-if-wlan-0-X)#

Call up the command with the following parameters:

wlan background scan interval <ms(300-60000)>

The parameter has the following meaning:

The interval is specified.

Further notes

You show the set interval with the show wlan client <wlan 0/X> command.

With this command, you specify how the client scans for further access points.

This command is only available in the client mode.

Time in milliseconds (ms) 300 ... 60 000

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Range of values / note

Default: 5000

Show Quick Links

Table of Contents