No Wlan Ampdu - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

The sending of AMPDU data packets is enabled.

Further notes

You display the setting with the show wlan advanced-11n <wlan 0/X> command.

You disable the function with the no wlan ampdu command.

no wlan ampdu

With this command, you disable the sending of AMPDU data packets. If the function is disabled,

only AMPDU data packets can be received.

● The IEEE 802.11n transmission standard is enabled.

You are in the Interface Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-if-wlan-0-X)#

Call the command without parameter assignment:

no wlan ampdu

The sending of AMPDU data packets is disabled.

Further notes

You display the setting with the show wlan advanced-11n <wlan 0/X> command.

You enable the function with the wlan ampdu command (default setting).

Table of Contents