Alias; No Alias - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Commands relating to other topics that can be called in the interface configuration mode can

be found in the relevant sections.

● If you exit the Interface configuration mode with the exit command, you return to the Global

configuration mode.

● If you exit the Interface configuration mode with the end command, you return to the

Privileged EXEC mode.

alias

With this command, you assign a name to an interface. The name only provides information

and has no effect on the configuration.

You are in the Interface Configuration mode.

The command prompt is as follows:

cli(config-if-$$$)#

Call up the command with the following parameters:

alias <interface-name>

The parameter has the following meaning:

interface-name

The interface was assigned a name.

Further notes

You delete the name of the interface with the no alias command.

With this command, you delete the name of the interface.

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Name of the interface

Configuration

Range of values / note

max. 63 characters

Show Quick Links

Table of Contents