Wlan Security Ap-Radius-Authenticator Primary - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Security and authentication

wlan security ap-radius-authenticator primary

With this command, you configure the RADIUS server as primary server.

This command is available only in access point mode.

You are in the WLAN Configuration mode and the "wlan security ap-radius-authenticator

address" is configured.

The command prompt is as follows:

cli (config-wlan)#

Call up the command with the following parameters:

wlan security ap-radius-authenticator primary <index (1-2)>

The parameter has the following meaning:

The RADIUS server is configured as primary server.

Further notes

You disable the setting with the no wlan security ap-radius-authenticator

primary command.

You display the setting with the show wlan security ap-radius-authenticator

Index of the RADIUS server

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Range of values / note

Configuration Manual, 09/2017, C79000-G8976-C324-08

Show Quick Links

Table of Contents