Interval (Access Point) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Network structures

The setting is configured.

Further notes

You display this setting and other information with the show wlan force roaming ip-

down command.

interval (Access Point)

With this command, you specify the interval at which echo messages (pings) are sent.

This command is available only in access point mode.

You are in the force roaming configuration mode.

The command prompt is as follows:

cli (config-wlan-froid-$)#

Call up the command with the following parameters:

interval <interval (100-5000)>

The parameter has the following meaning:

The setting is configured.

Further notes

You display this setting and other information with the show wlan force roaming ip-

down command.

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Range of values / note

Enter the required interval.

100 .. 5000 seconds

Configuration Manual, 09/2017, C79000-G8976-C324-08

Show Quick Links

Table of Contents