Sftp Filename - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

For information on identifiers of addresses and interfaces, refer to the section "Interface

identifiers and addresses (Page 29)".

The settings for the access to the selected TFTP server are configured.

sftp filename

With this command, you assign a name to a file type.

The file type decides the type that is affected by the sftp load or sftp save action. The

name decides the file to be copied to or from the SFTP server.

You are in the LOADSAVE configuration mode.

The command prompt is as follows:

cli(config-loadsave)#

Call up the command with the following parameters:

sftp filename {showfiles|filetype< filetype >name<filename>}

The parameters have the following meaning:

The file types are displayed or the file type is assigned a name.

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Keyword for the port of the server via

which the TFTP connection runs

Number of the port

Shows the available files

Keyword for a file type to be assigned a

Name of the file type

Keyword for a file name to be assigned

to the file type

Name of the file

Configuration

4.2 Load and Save

Range of values / note

Range of values / note

max. 100 characters

Show Quick Links

Table of Contents