Table of Contents
Advertisement
8.5.3.11
no static-lease
Description
With this command, you delete the assignment of an IPv4 address to a MAC address.
Requirement
You are in the DHCPPOOL configuration mode.
The command prompt is as follows:
cli(config-dhcp-pool-<ID>)#
Syntax
Call up the command with the following parameters:
no static-lease { mac <mac-address> | client-id <string> }
The parameter has the following meaning:
Parameter
mac
mac-address
client-id
string
Result
The assignment is deleted.
Further notes
You configure the assignment with the static-lease command.
8.6
SNMP
This section describes commands of the Simple Network Management Protocol (SNMP).
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
Range of values / note
Keyword for a MAC
-
address
Unicast MAC address Specify the MAC address.
aa:bb:cc:dd:ee:ff
Keyword for a DHCP
-
client ID
Freely definable
Enter the required designation.
DHCP client ID
Network protocols
8.6 SNMP
405
Hide quick links:
Advertisement
Table of Contents
