Wlan Security Default-Key (Client); Wlan Security Dot1X Check-Server-Certificate (Client) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

wlan security default-key (client)

With this command, you specify which WEP key from the key table is used for encryption.

This command is only available in the client mode.

You are in the Interface Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-wlan-context-x)#

Call up the command with the following parameters:

wlan security default-key <index(1-4)>

The parameter has the following meaning:

The WEP key is specified.

Further notes

You display the settings with the show wlan security command.

With this command, you enable the validation of the server certificate on the client.

This command is only available in the client mode.

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Index of the key table

Security and authentication

Range of values / note

Show Quick Links

Table of Contents