Tftp Filename; Tftp Load - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Configuration

4.2 Load and Save

tftp filename

With this command, you assign a name to a file type.

The file type decides the type that is affected by the tftp load or tftp save action. The

name decides the file to be copied to or from the TFTP server.

You are in the LOADSAVE configuration mode.

The command prompt is as follows:

cli(config-loadsave)#

Call up the command with the following parameters:

tftp filename {showfiles|filetype< filetype >name<filename>}

The parameters have the following meaning:

The file types are displayed or the file type is assigned a name.

Further notes

With the "show loadsave files" command, you can display the file types.

With this command, you load a file from a TFTP server into the file system of the device. The

TFTP protocol is used for the transfer. You can also display a list of available files.

Shows the available files

Keyword for a file type to be assigned a

Name of the file type

Keyword for a file name to be assigned

to the file type

Name of the file

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Range of values / note

max. 100 characters

Configuration Manual, 09/2017, C79000-G8976-C324-08

Show Quick Links

Table of Contents