Commands In The Loadsave Configuration Mode; Delete - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Commands in the LOADSAVE configuration mode

This section describes commands that you can call up in the LOADSAVE configuration mode.

In the Global Configuration mode, enter the loadsave command to change to this mode.

You display the valid file types for the commands in the LOADSAVE Configuration mode with

the global command show loadsave tftp.

● If you exit the LOADSAVE configuration mode with the exitcommand, you return to the

Global Configuration mode.

● If you exit the LOADSAVE configuration mode with the end command, you return to the

Privileged EXEC mode.

With this command, you call up the possible files or delete a specific file.

You are in the LOADSAVE configuration mode.

The command prompt is as follows:

cli(config-loadsave)#

Call up the command with the following parameters:

delete{showfiles|filetype<filetype>}

The parameters have the following meaning:

The files are displayed or the file is deleted.

Further notes

With the "show loadsave files" command, you can display the file types.

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Shows the available files

Keyword for the file type to be deleted

Name of the file type

Configuration

4.2 Load and Save

Range of values / note

max. 100 characters

Show Quick Links

Table of Contents