No Vap Security Encryption (Access Point) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Security and authentication

no vap security encryption (access point)

With this command, you disable encryption with a fixed (unchanging) WEP key. This setting

is activated as default. You can only enable or disable encryption if you have selected "Open

System" for authentication.

This command is available only in access point mode.

● The type of authentication is "open-system".

You are in the Interface Configuration mode of the VAP interface.

The command prompt is as follows:

cli (config-if-vapX-0-Y)#

Call the command without parameter assignment:

no vap security encryption

The encryption is disabled.

Further notes

You display the settings with the show wlan security <vapX 0/Y> command.

You enable the encryption with the vap security encryption command.

Table of Contents