Table of Contents
Advertisement
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
password {showfiles | filetype <filetype> [pw <password>]}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
pw
password
Result
The password for the certificate is configured and activated.
Further notes
You disable the password with the no password command.
4.2.5.11
no password
Description
With this command, you disable the password for encrypted certificates.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
Shows the available files
Shows that the file type follows that will be loaded
Name of the file type
Keyword for the password
Password
Configuration
4.2 Load and Save
Range of values / note
-
-
max. 100 characters
-
Enter the password for
the certificate with only
the following readable
ASCII characters: 0x20 -
0x7e.
97
Hide quick links:
Advertisement
Table of Contents
