Table of Contents
Advertisement
Configuration
4.2 Load and Save
Further notes
You shut down the interface with the shutdown complete command.
You can display the status of this function and other information with the show
interfacescommand.
4.2
Load and Save
This section describes commands for displaying, copying, saving and downloading files for
the device.
Note
Note that during the installation of a previous version, the configuration data can be lost. In
this case, the device starts up with the factory configuration settings after the firmware has
been installed.
Overview of the file types
Table 4-1
File type
Config
ConfigPack
CountryList
Debug
EDS
Firmware
GSDML
HTTPS Cert
LogFile
MIB
RunningCLI
82
HTTP
Description
Start configuration
Detailed configuration information. for example,
start configuration, users, certificates, favorites, firm‐
ware of the device (if saved as well).
For more detailed information on creating and using
the ConfigPack incl. firmware, refer to the section
"Maintenance".
The zip file contains the country list as a csv and as
a pdf file.
This file contains information for Siemens Support.
Electronic Data Sheet (EDS)
Electronic data sheets for describing devices in the
EtherNet/IP mode
Loading firmware updates
Information on the device properties (PROFINET)
HTTPS certificate
Maximum file size: 8192 bits
File with entries from the event log table
Private MSPS MIB file "Scalance_w_msps.mib"
This file contains an overview of the current config‐
uration in the form of CLI commands. You can down‐
load the text file. The file is not intended to be uploa‐
ded again unchanged.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Down‐
load
X
X
--
--
--
X
--
X
--
--
--
Configuration Manual, 09/2017, C79000-G8976-C324-08
Save
Delete
X
--
X
--
X
--
X
X
X
--
X
--
X
--
X
X
X
--
X
--
X
--
Hide quick links:
Advertisement
Table of Contents
