Commands In The Global Configuration Mode; Coordinates Height - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

source_prefix

The messages relating to the response of the called node are displayed.

Commands in the global configuration mode

This section describes commands that you can call up in the Global configuration mode.

In Privileged EXEC mode, enter the configure terminal command to change to this mode.

Commands relating to other topics that can be called in the Global configuration mode can be

found in the relevant sections.

You exit the Global configuration mode with the end or exit command and are then in the

Privileged EXEC mode again.

With this command, you enter a height coordinate.

You are in the Global Configuration mode.

The command prompt is as follows:

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Number of packets

Keyword for the size of the packets to

be transferred

Addressing mode anycast

Keyword for the sender interface

● source_prefix

Keyword for a VLAN connection

Number of the addressed VLAN

Prefix of the sender

Response wait time

If this time expires, the request is re‐

ported as "timed out".

Time until timeout

Configuration

Range of values / note

0 ... 2080 bytes

Default: 100

Show Quick Links

Table of Contents