Wlan Client Mac Address (Client) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Further notes

You display the setting with the show wlan client <wlan 0/X> command.

wlan client mac address (client)

With this command, you specify the MAC address of the client.

This command is only available in the client mode.

● The MAC address is assigned to the client manually.

You are in the Interface Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-if-wlan-0-X)#

Call up the command with the following parameters:

wlan client mac address <mac-address>

The parameter has the following meaning:

The MAC address was assigned to the client.

Further notes

You display the setting with the show wlan client <wlan 0/X> command.

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

MAC address of the client

Range of values / note

aa:aa:aa:aa:aa:aa

Network structures

Show Quick Links

Table of Contents