Vap Broadcast Ssid (Access Point) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Network structures

vap broadcast ssid (access point)

With this command, you enable the "Broadcast SSID" function. The SSID is sent in the frame

of the access point and is visible for other SCALANCE W700 devices. This means that clients

on which the "Any SSID" option is enabled can also connect to the access point.

This command is available only in access point mode.

You are in the Interface Configuration mode of the VAP interface.

The command prompt is as follows:

cli (config-if-vapX-0-Y)#

Call the command without parameter assignment:

vap broadcast ssid

The function is enabled.

Further notes

You display the setting with the show wlan vap <vap X 0/Y>command.

You disable the function with the no vap broadcast ssid command.

Table of Contents