Snmp Access - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

The parameters have the following meaning:

The setting is configured.

snmp access

With this command, you configure the access to an SNMP group.

You are in the Global configuration mode.

The command prompt is as follows:

cli(config)#

Call up the command with the following parameters:

snmp access <GroupName> {v1|v2c|v3 {auth|noauth|priv}}

[read <ReadView|none>][write <WriteView|none>][notify <NotifyView|

[{volatile|nonvolatile}]

The parameters have the following meaning:

Authentication

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Only SNMPv3 queries are processed

All SNMP queries are processed

Name of the group to which access is

Selects the version of the protocol used ● v1

Selects the authentication method.

Network protocols

Range of values / note

Default: all

Range of values / note

max. 32 characters

Enables MD5 or SHA as

authentication method

No authentication

Enables authentication and

Show Quick Links

Table of Contents